Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Got a 2-1/2" receiver and need to use your 2" towing and hitch-mounted accessories? The Gen-Y Hitch Reducer Sleeve is your ticket to adaptability. This nifty adapter seamlessly transforms a 2-1/2" receiver into a 2" receiver, letting you securely use your existing 2" ball mounts or hitch accessories. Its durable steel construction ensures longevity, offering a hassle-free setup by sliding easily into your hitch receiver or onto your accessory shank.
Reliability is crucial when it comes to towing, and the Gen-Y Hitch Reducer is built to last. Constructed from tough steel, this reducer sleeve withstands the rigors of frequent use while providing steadfast support for your hitch accessories. Its zinc primer and epoxy powder coat add an extra layer of protection against corrosion, keeping it looking and performing as good as new, journey after journey.
The Gen-Y Reducer Sleeve isn’t just strong; it’s smartly designed to ensure a flawless fit. Its dimensions are crafted perfectly at 5-1/2" long and 2-1/2" wide, streamlining the integration with your gear. The pinhole diameter is precisely 5/8", accommodating standard hitch pins or locks for secure, steady connections whether you’re hauling or towing.
Why complicate towing setups with additional parts? The Gen-Y Hitch Reducer Sleeve’s design eliminates the need for extensions, making it compatible with a wide range of hitch-mounted accessories like bike racks and cargo carriers. It offers a no-extra-parts-needed solution to attach your favorite gear to your vehicle with ease.
For those worried about rattling and sloppiness, the Gen-Y Reducer Sleeve delivers a snug fit that ensures smooth, stable towing. It’s specially crafted to minimize any movement between your accessories and the hitch, letting you enjoy a quieter and stress-free ride. The reassuringly tight fit means you don’t need an anti-rattle pin, making it a straightforward and effective solution.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Gen Y Hitch Reducer Sleeve. Now this adaptor changes your two and a half inch receiver to a two inch receiver. So that way you can use your two inch hitch mount accessories inside of your two and a half inch trailer hitch.The unit is constructed of a sturdy steel construction and it features a black powder coated finish that's going to help it resist rust and corrosion. It's going to last and look good for a long time.Now a pin and clip or a hitch lock, those items are not included, so they will need to be provided separately. If you're in need of one, you can find them here at etrailer.com. This unit will accept a standard 5/8th diameter pin.
The product is made in the USA.A few measurements to go over with you real quick. Starting with the overall length, measures five and a half inches. From the center of the pin hole to this edge right here measures three inches. And from this edge to the center of the pin hole measures two and a half inches.That's going to do it for today's look at the Gen Y Hitch Reducer Sleeve.
it does work... but it's hard to keep in position when inserting hitch, bike rack, etc. I see other reducer sleeves with tabs that prevent them from sliding in too far and wish I'd bought one of those. Longer overall length would have been better too
It does what it’s designed to do. The holes are hard to line up when being used with a 80lb gen y hitch. Over all I would buy again.
Pretty simple device. Works as promised!
Perfect fit for my 2019 Ford f250 with a 2 -1/2 inch receiver
Works as intended.
Only issue is it doesn't have a stop to keep it from sliding all the way into the receiver.
Great quality and prompt service. I've purchased several times and will in the future.
The adapter did what it advertised. With that said I ended up just buying a larger shank for my distribution hitch. With the original shank and using the adapter there was just to much slop and on bumpy roads it was starting to wallow out the hitch receiver.
Perfect fit..!
Thanks again
This reducer sleeve is quite nicely manufactured. I have absolutely no doubt that it will provide a mechanically safe and secure means to adapt my recently purchased adjustable 2" hitch unit with the rear 2.5" receiver on my 2019 F250 for use with any trailers that are at or under the specified load range. The only reasons that I gave it 4 stars vs 5 is that the interior isn't 100% covered with paint, as well as the fact that it doesn't fit really tightly inside the rear receiver of the F250. I hope this doesn't dissuade prospective purchasers from strongly considering this reducer sleeve for similar applications, as it's well manufactured and will most likely perform quite satisfactorily under any reasonable towing conditions.
I just received the item...that’s why it’s a four stars, haven’t had a chance to try it out yet...seems to fit fine, I’m sure it will work out just fine. If I have any issues I’ll sure to report it.
E-Trailer has been a great place to buy for all my towing and trailer needs... I have had no complaints at this point in time...thanks.
This product does exactly what it is made to do, reduce a 2.5" receiver to 2" so I can use all of my 2" hitch accessories, at a price I was wiling to pay.
Solid adaptor
e-trailer is great. Great products and great prices!
All items came in as promised. The sales rep with etrailer was very helpful.
Works perfect!
As advertised with quick shipping.
Jerry 
4/8/2025
Awesome Still going strong
Put this on my 2000 F250 super duty, turbo diese. Perfect fit and it looks badass. Your gonna need some extra help. This thing is heavy American steel.
great ! , worked for what i needed.
Works well
Fit the existing hitch and worked perfe ct
Good product
great product, good price!
It looks solid and was delivered quick.
Do you have a question about this Hitch Adapter?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jon
5/18/2020
Works as advertised...have had no issues, hauled loads of an excess of 13,000lbs. E-trailer is a great place for your trailer needs from products to great people.